How to set up a simple machine configuration (sprayer or tractor) for guidance only. This setup will use larger New Job and Resume Job buttons.
How to set up a quick machine configuration (one complete section width) for a sprayer or tractor.
How to set up a detailed machine configuration for a sprayer and its individual sections.
How to set up a detailed machine configuration for a tractor that does not have anything mounted to the three-point hitch.
How to set up/connect a non-ISO implement to your tractor.
How to set up/connect an ISO implement from a Raven RCM or Hawkeye system to your tractor. This is a liquid example but can be used for any application type.
How to change the implement connected to your tractor. Your implements must be configured previously (see videos above for more instructions).